Saturday, August 7, 2010

One size diaper cover pattern


I have to clean this up a bit, but here is the pattern for my one size diaper cover. It can be used as a turned and topstitched cover with optional third patterned outer layer, or adding the inner slit opening to make it a pocket stuffable cover. Make sure it prints with the one inch square box true to size or adjust your size on the pdf or printer.

FRONT
BACK

Print both pages and line up front to back at markings and center fold line. This will print as HALF a pattern, cut it out and trace it onto another piece of bigger paper if you want the full pattern.

The picture tutorial is found HERE

3 comments:

Kristin Kate White said...

Is there any way to make this for a fitted diaper?

Kristin Kate White said...

IM WONDERING IF THIS COULD BE USED FOR A FITTED DIAPER COVER ALSO?

Tonya said...

Yes, you can use the same pattern for a fitted diaper as long as your COVER pattern is slightly larger than your fitted. For example, if you are using this pattern for a cover, then subtract about a half inch off of all sides except for the wings for a fitted.
You would also leave off the pocket unless you were doing a stuffable fitted. Hope that helps!